What is The Difference Between IPv6 and IPv4?
There are currently two version of Internet Protocol (IP): IPv4 and a new version called IPv6.

IPv4 is the most widely deployed Internet protocol used to connect devices to the Internet. IPv4 uses a 32-bit address scheme allowing for a total of 2^32 addresses (just over 4 billion addresses).  With the growth of the Internet it is expected that the number of unused IPv4 addresses will eventually run out because every device -- including computers, smartphones and game consoles -- that connects to the Internet requires an address.

IPv6 is a new Internet addressing system being deployed to fulfill the need for more Internet addresses. IPv6 is the successor to Internet Protocol Version 4 (IPv4). It was designed as an evolutionary upgrade to the Internet Protocol and will, in fact, coexist with the older IPv4 for some time. IPv6 is designed to allow the Internet to grow steadily, both in terms of the number of hosts connected and the total amount of data traffic transmitted.

The Benefits of IPv6

While increasing the pool of addresses is one of the most often-talked about benefit of IPv6, there are other important technological changes in IPv6 that will improve the IP protocol:

  • No more NAT (Network Address Translation)
  • Auto-configuration
  • No more private address collisions
  • Better multicast routing
  • Simpler header format
  • Simplified, more efficient routing
  • True quality of service (QoS), also called "flow labeling"
  • Built-in authentication and privacy support
  • Flexible options and extensions
  • Easier administration (say good-bye to DHCP)

IPv4:  addresses are 32-bit numeric address (IPv4) is written in decimal as four numbers separated by periods. Each number can be zero to 255. For example, 1.160.10.240 could be an IP address.

IPv6: addresses are 128-bit IP address written in hexadecimal and separated by colons. An example IPv6 address could be written like this: 3ffe:1900:4545:3:200:f8ff:fe21:67cf.